How does Tec Thermoelectric Cooler works? By Ferrotec Nord

 Thermoelectric coolers are often regarded as peltier cooler or thermoelectric module. This device is known to be a semiconductor based electronic component which functions as a small heat pump.

A low voltage DC power source is applied to a Tec thermoelectric cooler so that the heat will be transferred via the module from one side to the other side.   Therefore, the one module face will be cooled when the opposite face is heated simultaneously.  It is very essential to note that the phenomenon could be reversed whereby a variation in the polarity of the applied voltage of DC will lead the heat to move in the opposite direction. 

 A Tec thermoelectric cooler can be utilized for both cooling and heating and that is why the device is highly suitable for   the temperature control application.

The general idea of a Tec thermoelectric cooler:

•          If a general single stage thermoelectric module is placed on a heat sink which was maintained at basic room temperature, and the module is connected to a suitable battery or other poor source of DC, the cold side of the thermoelectric module would cool down to estimated forty degree C. at this time, the thermoelectric module would be generating almost no heat. The module would have reached its maximum rated DeltaT. 

•         If the heat is gradually added to the cold side of the module, the particular side temperature would increase until the heat sink temperature is regulated. During this time the thermoelectric cooler would have gained its maximum rated heat pumping capacity.

•         Both the mechanical refrigerators and the thermoelectric cooler are operated by the same fundamental laws of refrigeration systems and thermodynamics.

•          In a mechanical refrigeration unit, a compressor increases the pressure of a liquid and circulates the refrigerant via the system.

•          When the electric current is passed via a conductor having a temperature gradient over its length, the heat will be either expelled from the conductor or absorbed by it.

•         Whether the heat is expelled or absorbed, the function of the cooler entirely depends upon the direction of both the temperature gradient and the electric current. This phenomenon is regarded to be the Thomson effects.

This technology is far less commonly applied to the application of refrigeration than the vapour compression refrigeration.  The several benefits of a thermoelectric cooler compared to a vapour compression refrigerator are the lack of the circulating liquid or moving parts, small size, very long life and flexible shape.  The major disadvantages of a thermoelectric cooler are poor power efficiency and high cost.  Many major companies and researchers are trying to develop the peltier coolers which are cheap yet efficient.

The Ferrotec Nord Corporation is the proven leader of this field.  This company   provides the customers with a wide range of peltier cooler and thermoelectric modules which are really cost effective. If you are wondering which will be the best place to buy the modules from, the Ferrotec Nord Corporation would be your ultimate guide.